What Are The Safe Operating Regulations for Crawler Bulldozers?

 During the work of crawler bulldozers, the following safety items should be paid attention to:


1. Check whether the fuel filling point of the Crawler Bulldozer is full. Fill the water tank when the water is insufficient. Check the fuel level and when filling the fuel, fireworks are strictly prohibited.


2. Whether the joysticks are normal and in the neutral position, depending on the surroundings, there are no safety hazards.


3. Start the engine at idle speed, check the technical status of the machine, and remove the fault in time if the fault is found, and work only when the oil temperature and water temperature rise to the specified values.


4. When the traction machinery is connected, the lowest reverse gear should be used.


5. It is not allowed to refuel, add water, or adjust the work during driving. During driving, random personnel are not allowed to lean on the door or stand on the wing panel, and they are not allowed to get up and down the bulldozer when it is not stopped.


Hydrostatic Bulldozer

Hydrostatic Bulldozer


6. When the engine is not stalled, it is strictly forbidden to perform maintenance under the car.


7. When adjusting the bulldozer blade of the Hydrostatic Bulldozer, a reliable support should be placed below it to prevent the bulldozer from falling and hurting people.


8. Low-grade driving should be used to pass bridges and culverts, and bridges with a bearing capacity less than the weight of the bulldozer are prohibited.


9. When crossing the railway, you must obtain the approval of the railway management department, add wooden planks, and be directed by a special person. Use a low gear and the driving direction is perpendicular to the rail to avoid overturning the rail. When crossing the highway, you must plank planks and a special person will guide you.


10. When adjusting the driving, do not make an emergency steering, and use a low speed when turning.


11. When driving on steep slopes, try to avoid changing speeds. The gradient should not be greater than the specified value of the machine. It is strictly forbidden to drive sideways to prevent the machine from turning over.


12. When the uphill engine suddenly stops, use the left and right brakes at the same time, lower the blade, and move the reversing lever to the reverse position. Make the bulldozer slowly slide to a stable area under its own weight.


13. When the Bulldozer stops, it is necessary to cut off the engine power, brake the bulldozer, and after the standby stops, put the bulldozer down, put the gear lever in the neutral position, reduce the throttle, and let the engine idle for 5 minutes before turning off. The engine must be turned off after it is turned off. Turn on the main switch and pull out the electric key. It is forbidden to stop the machine on a steep slope, and the stopping place must be safe.


评论

发表评论

此博客中的热门博文

Reasonable Operation Of Track Bulldozer

图片
The  Track Bulldozer   has the greatest influence on the transmission oil temperature due to the external resistance and the maximum output torque during the shovel operation. If the small throttle is used for a long time to operate the torque converter in the inefficient zone, the transmission oil temperature will rise. If the large throttle is used during frequent shifting, it will cause severe impact on the machine and increase the temperature of the transmission oil. To this end, the operator should reasonably control the amount of bulldozer and the timing of the blade lifting and lowering. The soil feeding distance should not be too long, so as to prevent the use of small throttle for a long time. We are  Track Bulldozer Supplier , specializing in the production of machinery and equipment, welcome to consult and order.
阅读全文

How to Choose the Right Bulldozer?

图片
  Purchasing a bulldozer is a significant investment, whether you're in the construction business or need one for specific projects. To ensure you make an informed decision and get the   right bulldozer   for your needs, here are four essential tips and things to know before buying one: 1. Define Your Requirements and Applications The first step in   buying a bulldozer  is understanding your specific requirements and applications. Consider the following: Size and Capacity:  Bulldozers come in various sizes and capacities. Determine the size that can handle your typical projects and the type of material you'll be moving. Attachments:  Many bulldozers can be equipped with various attachments, such as blades, rippers, and winches. Assess which attachments you need for your tasks. Terrain:  Consider the type of terrain you'll be working on, as this can affect the tracks or tires your bulldozer should have. Understanding your specific needs will help you narrow down your options
阅读全文

No Steering Failure of Crawler Hydraulic Steering Bulldozer

图片
  During the use of the bulldozer, due to various reasons, the bulldozer is difficult to turn, cannot turn, cold cars can turn, hot cars can not turn. After the occurrence of these failure phenomena, according to the use time of the bulldozer and the occurrence process of the failure, the classification analysis should be carried out to check the truth, which can avoid unnecessary disassembly and reduce the internal pollution of the machine. The following   Bulldozer Suppliers   introduce common fault phenomena such as bulldozers and related knowledge of inspection and elimination. When the  Dozer  is in use, it suddenly fails to turn on both sides. The overflow valve at the oil inlet of the directional control valve assembly can be disassembled. The reason is that the oil is too dirty, the impurities in the oil wear or strain the surface of the overflow valve core and the inner cavity of the valve body, so that the valve core is stuck in the position where the oil return is turned on,
阅读全文