Ten Important Points of Bulldozer Operation That Must Be Remembered!

 The Bulldozer driver is very important to the daily maintenance of the bulldozer to ensure the safe and effective use of the bulldozer, prevent malfunctions and accidents, and extend the service life of the bulldozer. Your bulldozer is always out of order, so what do you use to make money? So, in order to earn more money, you must do the following ten points:


1. In order to prolong the service life, the car should be stopped when the gear is changed or reversed.


2. Do not perform steering operation under load.


3. When the Track Type Dozer is doing the bulldozing operation, the cutting soil is too deep or the rear part is tilted, and the cutting depth should be adjusted in time to keep the bulldozer evenly bulldozing.


4. When the load is large, use a lower speed for operation.


Bulldozer

Bulldozer


5. Always be in control during exercise.


6. Choose the appropriate gear when going downhill and don't change gear when going downhill.


7. Lift the blade to a proper height before starting, about 400mm above the ground, and don't block the line of sight.


8. When parking, set the throttle to a lower speed, manipulate the unit to the neutral position, and drop the lifted working device onto the ground.


9. Run at idle speed for 5 minutes before stopping the engine. Otherwise, the engine is prone to early wear.


10. Turn off the start key and turn off the main power supply.


If necessary, please contact the Bulldozer Supplier


评论

发表评论

此博客中的热门博文

Reasonable Operation Of Track Bulldozer

图片
The  Track Bulldozer   has the greatest influence on the transmission oil temperature due to the external resistance and the maximum output torque during the shovel operation. If the small throttle is used for a long time to operate the torque converter in the inefficient zone, the transmission oil temperature will rise. If the large throttle is used during frequent shifting, it will cause severe impact on the machine and increase the temperature of the transmission oil. To this end, the operator should reasonably control the amount of bulldozer and the timing of the blade lifting and lowering. The soil feeding distance should not be too long, so as to prevent the use of small throttle for a long time. We are  Track Bulldozer Supplier , specializing in the production of machinery and equipment, welcome to consult and order.
阅读全文

How to Choose the Right Bulldozer?

图片
  Purchasing a bulldozer is a significant investment, whether you're in the construction business or need one for specific projects. To ensure you make an informed decision and get the   right bulldozer   for your needs, here are four essential tips and things to know before buying one: 1. Define Your Requirements and Applications The first step in   buying a bulldozer  is understanding your specific requirements and applications. Consider the following: Size and Capacity:  Bulldozers come in various sizes and capacities. Determine the size that can handle your typical projects and the type of material you'll be moving. Attachments:  Many bulldozers can be equipped with various attachments, such as blades, rippers, and winches. Assess which attachments you need for your tasks. Terrain:  Consider the type of terrain you'll be working on, as this can affect the tracks or tires your bulldozer should have. Understanding your specific needs will help you narrow down your options
阅读全文

No Steering Failure of Crawler Hydraulic Steering Bulldozer

图片
  During the use of the bulldozer, due to various reasons, the bulldozer is difficult to turn, cannot turn, cold cars can turn, hot cars can not turn. After the occurrence of these failure phenomena, according to the use time of the bulldozer and the occurrence process of the failure, the classification analysis should be carried out to check the truth, which can avoid unnecessary disassembly and reduce the internal pollution of the machine. The following   Bulldozer Suppliers   introduce common fault phenomena such as bulldozers and related knowledge of inspection and elimination. When the  Dozer  is in use, it suddenly fails to turn on both sides. The overflow valve at the oil inlet of the directional control valve assembly can be disassembled. The reason is that the oil is too dirty, the impurities in the oil wear or strain the surface of the overflow valve core and the inner cavity of the valve body, so that the valve core is stuck in the position where the oil return is turned on,
阅读全文