Two Tips On The Use Of Crawler Dozers

1. Turn
When the crawler dozer is turning in operation, the steering clutch lever can be pulled back to separate the steering clutch, so that the track speed of the corresponding side becomes slow, and the bulldozer starts to turn. In order to make the bulldozer turn sharply, in addition to separating the steering clutch, the corresponding brake pedal should be stepped on, and the sharp turn is generally allowed only when the Ⅰ gear is running. When the brake is not in use, the foot should not be placed on the brake pedal, otherwise, the brake band wear and fuel consumption will increase.
When the bulldozer is turning, the brake pedal should be smoothly pressed to avoid jumping. After the turn is over, loosen the brake pedal and then release the joystick. If the turning radius is large, it is not necessary to step on the brake pedal. When it is not necessary, it is forbidden to make the bulldozer rotate at high speed in order to avoid accidents caused by track derailment.
2. Ramp
Different types of bulldozers have different grade ability (typically 30°), which is different for slopes and terrain that can be adapted to the same type of bulldozer. The driver should be familiar with the climbing limit of the model used to avoid landslides due to insufficient up and downhill capacity.
Before going uphill, you should choose the appropriate speed block according to the terrain, the slope size and the length, and you are not allowed to shift gears in the middle of the climb. When going uphill, the bulldozer should run at a vertical angle to the lateral slope of the hill. The blade can be lowered appropriately to avoid affecting the line of sight and to quickly bring the blade to the ground to help the bulldozer brake in the event of a landslide.
If the engine is turned off during the uphill journey, stop the oil supply immediately, lower the blade and brake the brakes. When the slope cannot be stopped, the reverse gear should be slowly slid to the bottom of the slope (sliding while braking) and then started. If the oil supply is not stopped and the forward gear is slid down, the power will be reversed to the engine and the fire will be reversed, causing the air filter to spray outward. In the event of a reverse fire, the throttle should be quickly closed and the bulldozer braked. Before restarting, check that the shift lever is in the neutral position.
We are crawler dozer China supplier, welcome to contact us!
Crawler Dozer

评论

发表评论

此博客中的热门博文

Reasonable Operation Of Track Bulldozer

图片
The  Track Bulldozer   has the greatest influence on the transmission oil temperature due to the external resistance and the maximum output torque during the shovel operation. If the small throttle is used for a long time to operate the torque converter in the inefficient zone, the transmission oil temperature will rise. If the large throttle is used during frequent shifting, it will cause severe impact on the machine and increase the temperature of the transmission oil. To this end, the operator should reasonably control the amount of bulldozer and the timing of the blade lifting and lowering. The soil feeding distance should not be too long, so as to prevent the use of small throttle for a long time. We are  Track Bulldozer Supplier , specializing in the production of machinery and equipment, welcome to consult and order.
阅读全文

How to Choose the Right Bulldozer?

图片
  Purchasing a bulldozer is a significant investment, whether you're in the construction business or need one for specific projects. To ensure you make an informed decision and get the   right bulldozer   for your needs, here are four essential tips and things to know before buying one: 1. Define Your Requirements and Applications The first step in   buying a bulldozer  is understanding your specific requirements and applications. Consider the following: Size and Capacity:  Bulldozers come in various sizes and capacities. Determine the size that can handle your typical projects and the type of material you'll be moving. Attachments:  Many bulldozers can be equipped with various attachments, such as blades, rippers, and winches. Assess which attachments you need for your tasks. Terrain:  Consider the type of terrain you'll be working on, as this can affect the tracks or tires your bulldozer should have. Understanding your specific needs will help you narrow down your options
阅读全文

No Steering Failure of Crawler Hydraulic Steering Bulldozer

图片
  During the use of the bulldozer, due to various reasons, the bulldozer is difficult to turn, cannot turn, cold cars can turn, hot cars can not turn. After the occurrence of these failure phenomena, according to the use time of the bulldozer and the occurrence process of the failure, the classification analysis should be carried out to check the truth, which can avoid unnecessary disassembly and reduce the internal pollution of the machine. The following   Bulldozer Suppliers   introduce common fault phenomena such as bulldozers and related knowledge of inspection and elimination. When the  Dozer  is in use, it suddenly fails to turn on both sides. The overflow valve at the oil inlet of the directional control valve assembly can be disassembled. The reason is that the oil is too dirty, the impurities in the oil wear or strain the surface of the overflow valve core and the inner cavity of the valve body, so that the valve core is stuck in the position where the oil return is turned on,
阅读全文