What Is The First Aid Measure For The Failure Of The Excavator?
There is a problem when using the excavator on-site working environment, experienced excavators can use the emergency method to solve the problem in a short time to continue the project, but there are also inexperienced operators to continue to supply the progress project after the phone call waits for the rescue delay. Now details A solution to the general problem is described. 1. Short repair time: If the excavator suddenly fails during operation or driving, it should be repaired in a simple manner so that it can travel or run reliably. 2, plugging: the excavator has been used for a long time, it will cause oil leakage, water leakage and air leakage. Emergency plugging can be done with epoxy glue or soap to prevent leakage. If there are perforations, plug them with cork stoppers and tie them with wire or rope if necessary. If the oil leaks due to loose fittings, you can use the original tape of the belt to wind the wire 3-5 turns and tighten. 3. Bundling: When the bolt on the